14-04-15, 10:42 PM
Can you manage to wipe your own arse without supervision.
There is no one solution to how to fit the bottom yoke.
you can machine the stem and yoke and make a spacer to compensate.
you can pin it in place with a rolling and bearing.
You can fill it with Devcon and pin it.
A justy spacer is to space the top yoke away from the top bearing locknuts and shim out the stem as the R1 has a different diameter stem to the fazer. The dimensions are out there on the Internet.
There are several people who have fitted an R1 front end who have taken the time to inform us how they did it (with pictures). So do some research and stop whining like a bitch!
There is no one solution to how to fit the bottom yoke.
you can machine the stem and yoke and make a spacer to compensate.
you can pin it in place with a rolling and bearing.
You can fill it with Devcon and pin it.
A justy spacer is to space the top yoke away from the top bearing locknuts and shim out the stem as the R1 has a different diameter stem to the fazer. The dimensions are out there on the Internet.
There are several people who have fitted an R1 front end who have taken the time to inform us how they did it (with pictures). So do some research and stop whining like a bitch!
The problem with socialism is that sooner or later you run out of other people's money!