|
clutch problem...
|
10-03-15, 09:22 PM
You'll need a bent spanner and a screw driver, got to loosen it with the spanner then adjust with the screw driver whilst holding the spanner in place. Then tighten with the spanner whilst holding the screw driver in place. Screw the adjuster on the clutch lever in nearly all the way before tightening at the sprocket cover end then fine tune with the adjuster on the lever
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
clutch problem... - by Paulfzs - 10-03-15, 06:52 PM
Re: clutch problem... - by stevie-g1968 - 10-03-15, 09:03 PM
Re: clutch problem... - by Paulfzs - 10-03-15, 09:05 PM
Re: clutch problem... - by Triggergee - 10-03-15, 09:22 PM
Re: clutch problem... - by Paulfzs - 10-03-15, 10:06 PM
Re: clutch problem... - by unfazed - 10-03-15, 10:15 PM
Re: clutch problem... - by stevie-g1968 - 10-03-15, 10:34 PM
Re: clutch problem... - by darrsi - 10-03-15, 10:40 PM
Re: clutch problem... - by Paulfzs - 10-03-15, 11:31 PM
Re: clutch problem... - by darrsi - 10-03-15, 11:50 PM
Re: clutch problem... - by Paulfzs - 11-03-15, 01:18 AM
Re: clutch problem... - by darrsi - 11-03-15, 03:05 AM
Re: clutch problem... - by Paulfzs - 11-03-15, 12:07 PM
Re: clutch problem... - by Fazerider - 11-03-15, 01:23 PM
Re: clutch problem... - by unfazed - 11-03-15, 01:32 PM
Re: clutch problem... - by Paulfzs - 11-03-15, 02:34 PM
Re: clutch problem... - by Paulfzs - 14-03-15, 05:47 PM
Re: clutch problem... - by His Dudeness - 14-03-15, 08:52 PM
Re: clutch problem... - by Paulfzs - 14-03-15, 10:39 PM
Re: clutch problem... - by His Dudeness - 14-03-15, 11:34 PM
|
