Found this the other day and used it when fitting my "DID 530VXHeavy Duty" chain...
but the rivet size diameter on any of the chain pin rivets is around 5.7mm so I've riveted mine at 5.8mm , but the chart suggests the pins are 5.24 in diameter; so I just wondering whether the extra 0.56mm is sufficient to keep this chain together !! I'm using a vernier calliper with three decimal place resolution so quite accurate.
but the rivet size diameter on any of the chain pin rivets is around 5.7mm so I've riveted mine at 5.8mm , but the chart suggests the pins are 5.24 in diameter; so I just wondering whether the extra 0.56mm is sufficient to keep this chain together !! I'm using a vernier calliper with three decimal place resolution so quite accurate.
Three lefts make a right