12-05-14, 04:28 PM
what an absolute cu....... pain of a job that is. All 8 replaced over 16 hours at the weekend. Every one needed drilling out, had some extended drills made up to get past the frame ails. Would have been easier access with the forks and wheel out for sure. Replaced with stainless 302 studs 5mm overlength, 18mm long stainless barrel nuts and anti gall grease used. Happy now but wasn't over the weekend :'(
watch the left hand one, breaking through the stud cut into an oilway, loctite 243 sealed the stud, coulda been expensive that one.
watch the left hand one, breaking through the stud cut into an oilway, loctite 243 sealed the stud, coulda been expensive that one.