Straightened front fairing and headlight frame. It was bent. Took some torch light heating and then twisting with a lever.
Left fork was a bit bent. Loosened the bolts holding it and rotated it a bit. It is now OK - front axle stays in line. Hope this won't effect handling. The bend is not visible.
Left crash pad was a bit bent - straightened it back. No cracking showed.
Left to try straightening left footpeg holder (the part welded to the frame) and side fairing holders.
Fairing was left to be welded as well (that will cost around 10 euros).
Hopefully the footpeg will be mended, so I will get away with minimum repair cost (and time).
Pics after just accessing the damage:
![[Image: Photo-0008_zpsbd28b723.jpg]](http://i1373.photobucket.com/albums/ag380/zlivook/Photo-0008_zpsbd28b723.jpg)
![[Image: Photo-0004_zpsb3264a92.jpg]](http://i1373.photobucket.com/albums/ag380/zlivook/Photo-0004_zpsb3264a92.jpg)
![[Image: Photo-0006_zpsd0c91583.jpg]](http://i1373.photobucket.com/albums/ag380/zlivook/Photo-0006_zpsd0c91583.jpg)
![[Image: Photo-0002_zps1f0e9cb0.jpg]](http://i1373.photobucket.com/albums/ag380/zlivook/Photo-0002_zps1f0e9cb0.jpg)
Left fork was a bit bent. Loosened the bolts holding it and rotated it a bit. It is now OK - front axle stays in line. Hope this won't effect handling. The bend is not visible.
Left crash pad was a bit bent - straightened it back. No cracking showed.
Left to try straightening left footpeg holder (the part welded to the frame) and side fairing holders.
Fairing was left to be welded as well (that will cost around 10 euros).
Hopefully the footpeg will be mended, so I will get away with minimum repair cost (and time).
Pics after just accessing the damage:
Most things done in a hurry need to be done again - patiently.