|
Oil change failed
|
02-11-13, 09:02 PM
when using a chain or strap wrench,position the tool as close to the engine as possible so it dos`nt distort the filter.......the chisel tip is a TOP TIP but take it easy.....when refitting new filter,a smear of oil around the seal and just hand tight...no problems next time.....good luck and dont forget theres loads of help on here
One, is never going to be enough.....
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Oil change failed - by Countdown - 02-11-13, 04:37 PM
Re: Oil change failed - by chris.biker - 02-11-13, 04:42 PM
Re: Oil change failed - by Countdown - 02-11-13, 04:58 PM
Re: Oil change failed - by Fazerider - 02-11-13, 05:29 PM
Re: Oil change failed - by adeejaysdelight - 02-11-13, 05:41 PM
Re: Oil change failed - by ogri48 - 02-11-13, 07:14 PM
Re: Oil change failed - by jon - 02-11-13, 08:33 PM
Re: Oil change failed - by red98 - 02-11-13, 09:02 PM
Re: Oil change failed - by Andy Clap - 02-11-13, 10:35 PM
Re: Oil change failed - by Doddsie - 02-11-13, 10:46 PM
Re: Oil change failed - by chaz - 02-11-13, 11:09 PM
Re: Oil change failed - by Doddsie - 02-11-13, 11:54 PM
Re: Oil change failed - by noggythenog - 03-11-13, 12:43 AM
Re: Oil change failed - by Chris - 03-11-13, 12:58 AM
Re: Oil change failed - by chaz - 03-11-13, 01:19 AM
Re: Oil change failed - by VNA - 03-11-13, 12:48 PM
Re: Oil change failed - by tony_d123 - 03-11-13, 01:44 PM
Re: Oil change failed - by Countdown - 03-11-13, 04:01 PM
|
