|
Oil change failed
|
02-11-13, 07:14 PM
Heat always works for me if anythings stuck mate. It'll expand then contract, generally breaking the seal.if it's a place you can't use a naked flame, a hot air gun like a paint stripper will generally do, but takes longer. The other option is extreme cold if you have a means of imparting it to the bit that needs removing.. that'll make it contract and you got more chance of undoing it straight away.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Oil change failed - by Countdown - 02-11-13, 04:37 PM
Re: Oil change failed - by chris.biker - 02-11-13, 04:42 PM
Re: Oil change failed - by Countdown - 02-11-13, 04:58 PM
Re: Oil change failed - by Fazerider - 02-11-13, 05:29 PM
Re: Oil change failed - by adeejaysdelight - 02-11-13, 05:41 PM
Re: Oil change failed - by ogri48 - 02-11-13, 07:14 PM
Re: Oil change failed - by jon - 02-11-13, 08:33 PM
Re: Oil change failed - by red98 - 02-11-13, 09:02 PM
Re: Oil change failed - by Andy Clap - 02-11-13, 10:35 PM
Re: Oil change failed - by Doddsie - 02-11-13, 10:46 PM
Re: Oil change failed - by chaz - 02-11-13, 11:09 PM
Re: Oil change failed - by Doddsie - 02-11-13, 11:54 PM
Re: Oil change failed - by noggythenog - 03-11-13, 12:43 AM
Re: Oil change failed - by Chris - 03-11-13, 12:58 AM
Re: Oil change failed - by chaz - 03-11-13, 01:19 AM
Re: Oil change failed - by VNA - 03-11-13, 12:48 PM
Re: Oil change failed - by tony_d123 - 03-11-13, 01:44 PM
Re: Oil change failed - by Countdown - 03-11-13, 04:01 PM
|
