31-10-13, 11:30 PM
Sorry guys, I had terrible cold last days.
I've ordered linkage for about 25 from eBay in very good condition and bought 0,5kg of moly grease from Halfords for 6 quids.
It took about 1 hour to detach old one and about one hour to fit new one. You don't need to take off the wheel, it can be done from the right side of motorcycle !.
Now It would take me like 10-20 minutes to detach and the same for fitting new one
.
Also ordered plate on eBay, changed fluid and bleeded air, but I think that dust seals should be replaced in a few weeks months, because brake it's still soft.
[size=78%]... and yeah finaly I've passed MOT. [/size]
However FZS600 was running very well till MOT. Now after few rainy days, got major issue with ignition/carbs or sth like that, because it runs like 50cc moped and engine does not run smooth. I need to describe it with my poor english in separate topic (I will try search before).
I've ordered linkage for about 25 from eBay in very good condition and bought 0,5kg of moly grease from Halfords for 6 quids.
It took about 1 hour to detach old one and about one hour to fit new one. You don't need to take off the wheel, it can be done from the right side of motorcycle !.
Now It would take me like 10-20 minutes to detach and the same for fitting new one
.Also ordered plate on eBay, changed fluid and bleeded air, but I think that dust seals should be replaced in a few weeks months, because brake it's still soft.
[size=78%]... and yeah finaly I've passed MOT. [/size]
However FZS600 was running very well till MOT. Now after few rainy days, got major issue with ignition/carbs or sth like that, because it runs like 50cc moped and engine does not run smooth. I need to describe it with my poor english in separate topic (I will try search before).