All done 
Emulators set at 2.75 turns
4 x 10mm holes..
Putoline 15w oil
135mm air gap..
5 rings showing on preload adjusters..
As I have wilbers springs that require 25-40mm of installed preload I had to cut 10mm from the spacers..
Just measured sag and its bang on first time! 22mm free sag and 35mm rider sag..
I am 95kg geared up..
I will go for a spin and report back....
Been for a 2 hour ride, The bike feels great! Sweeping bends felt a lot safer, one in particular that I ride @ 120ish has always felt on the edge as its a little uneven and used to unsettle the bike which isn't confidence inspiring. But today same bend same speed felt much more stable.
Dive is much less also, which seems to be making braking distances shorter..
All in all, its great, and a big thank you to Kebab for all his effort in this..
Next for me is to replace my thou shock with a r6 one I have just bought... Looks like I will be tapping up kebab again for more info on the spacer needed :lol
Emulators set at 2.75 turns
4 x 10mm holes..
Putoline 15w oil
135mm air gap..
5 rings showing on preload adjusters..
As I have wilbers springs that require 25-40mm of installed preload I had to cut 10mm from the spacers..
Just measured sag and its bang on first time! 22mm free sag and 35mm rider sag..
I am 95kg geared up..
I will go for a spin and report back....
Been for a 2 hour ride, The bike feels great! Sweeping bends felt a lot safer, one in particular that I ride @ 120ish has always felt on the edge as its a little uneven and used to unsettle the bike which isn't confidence inspiring. But today same bend same speed felt much more stable.
Dive is much less also, which seems to be making braking distances shorter..
All in all, its great, and a big thank you to Kebab for all his effort in this..
Next for me is to replace my thou shock with a r6 one I have just bought... Looks like I will be tapping up kebab again for more info on the spacer needed :lol