11-09-13, 01:36 PM
If having done all of the above, and you've still got a problem, it may beneficial to check that the jets aren't blocked and needle valves are sealing properly in the carbs.
I've got two fazers, one that's run regularly and one that isn't.
The one that's run regularly has never given me a problem..... not so the one that isn't
I've had two plugs fail (basically they worked perfectly when the bike was last run and then two years or so later when it was started again one simply didn't work..... this has happened twice) , and I had to clean out the jets in the carbs and stop a needle valve sticking open.
And the bike has only done 700 miles from new.
My experience is they don't like being stood for a long period of time.
Needless to say, if your bike is run regularly this may not apply.