11-05-13, 10:46 AM
Use a 6mm but cut a notch out the end of it, that way you don't have to completely undo the bolt from the battery, just loosen slightly and slide the terminal under.
If the connectors are too thick ( or if you have several attached to the battery) the bolt ends up being too short to grab the captive nut in the battery.
Just always remember to tighten the battery connectors as tight as you can over wise you'll end up with drainage/ charging woes!
If the connectors are too thick ( or if you have several attached to the battery) the bolt ends up being too short to grab the captive nut in the battery.
Just always remember to tighten the battery connectors as tight as you can over wise you'll end up with drainage/ charging woes!
Some say...