13-04-13, 07:16 PM
A socket or spanner will be marked "27mm" and "24mm".
I wouldn't use an open ended spanner but a ring spanner would be o.k. except you can't tighten it to the correct toque with one.
You should use a socket and torque the nut up to 117Nm.
In the absence of a torque wrench that is best described as jolly tight.
I wouldn't use an open ended spanner but a ring spanner would be o.k. except you can't tighten it to the correct toque with one.
You should use a socket and torque the nut up to 117Nm.
In the absence of a torque wrench that is best described as jolly tight.