EXUP woes..

[b1k3rdude]

• I've sort of made a mess of it I know, I've seen a few methods for removing sheared bolts, such as welding a nut on, drilling with a left hand bit etc. but most of these won't work.
  
• Another thing I wanted to ask is are there any stronger bolts available that would better resist the heat from the exhaust?
  

• Take the headers of the bike and take them to a machine/engineering shop as the best way is to use an overhead drill to get the drill bit in the exact center oif the sheared bolt.
  
• Yes, titainium bolts, M6x10mm, cost about £3 each. Don't corrode or seize in.