brake lines

[Dave48]

Fitting braided lines is not difficult-just need to be methodical. Recommend you fit twin lines from front m/cylinder & do away with union piece-ie one line to each calliper. Use new crush washers-usually supplied in the kit. Dont overtighten union bolts as your going steel into alloy-check torque figs.Bleeding can be a pain but patience will get you there whether you use tube& jamjar or a proprietary bleeder (I have a Mityvac & its ace!). Dont forget to protect all your lovely paintwork from brake fluid spills, Good luck. One of the best mods Ive ever done to ANY bike Ive owned