Exhaust sealant

[keno]

Had a similar problem when i fitted my delkavic can & link pipe but mine was blowing at the downpipe joint thought it was my gasket being old so bought a new one but was still blowing,i used some of this kind of sealant and has been leak free for over 12 months now,if you use this stuff make sure you let it cure for 36-48 hours before starting the bike or it will leak as it wont have cured properly.Or if your leak is not to bad you could just let the carbon build up and that may seal it naturally mine was pretty bad so had no choice but to use sealant.


http://www.ebay.co.uk/itm/1-x-RED-HIGH-T...1366wt_802 


Good luck..