11-01-12, 05:23 PM
Not quite the same but I had 'em fitted to my 1000, better than standard but wasn't mega-impressed.
Cheapest option - you could try this 1000 mod on the 600, where you remove an inch off the 'tightest' coil ends, then make spacers an inch longer to compensate. Probably between £5-20 depending on whether you change the fork oil. Certainly firms up the 1000's forks nicely.
http://www.yamahafz1oa.com/ravenriderssu...rade.shtml
Next option is a pair of Hagon or K-tech springs. As with the standard springs, Hagon are also progressive whereas K-techs would be linear springs suited to your requested weight (better). £60(Hagon) £90(K-tech) for springs
Finally you might consider my old Gold valve conversion to give you compression and rebound adjustment, although it'll cost more like £200 :-D
http://foc-u.co.uk/index.php/topic,71.0.html
Cheapest option - you could try this 1000 mod on the 600, where you remove an inch off the 'tightest' coil ends, then make spacers an inch longer to compensate. Probably between £5-20 depending on whether you change the fork oil. Certainly firms up the 1000's forks nicely.
http://www.yamahafz1oa.com/ravenriderssu...rade.shtml
Next option is a pair of Hagon or K-tech springs. As with the standard springs, Hagon are also progressive whereas K-techs would be linear springs suited to your requested weight (better). £60(Hagon) £90(K-tech) for springs
Finally you might consider my old Gold valve conversion to give you compression and rebound adjustment, although it'll cost more like £200 :-D
http://foc-u.co.uk/index.php/topic,71.0.html