Recently ordered the 12mm nut & tab washer upgrade kit from my local dealer.
The combined kit carries the Yamaha part no 90891-10124 & retails @ £2-44.
However the kit contained the 2 individually wrapped items and the respective part nos are:
12mm Nut part no. 90179-18006
Tab washer " " 90215-21290
I only mention this because the modification kit & the 12mm nut are not on the normal microfiche pages but if you quote the part nos above they can be located & obtained.
Have you measured the nut?
I've just changed my c&s, went to local yam dealer for the new nut which as far as we could work out has been superceded again but by a 10mm nut!
Some say...
(10-02-16, 12:57 PM)Punkstig link Wrote: Have you measured the nut?
I've just changed my c&s, went to local yam dealer for the new nut which as far as we could work out has been superceded again but by a 10mm nut!
Why would they go 10mm from 12mm, that's just daft?
More people are born because of alcohol than will ever die from it.
I know, that's why I'm asking if he's measured it- I'd assume the 12mm is still available but I didn't have the correct part number at the time and the 10mm (measured myself) is the one on the computer system)
Some say...
I have a spare nut and washer kit (90891-10124) one at home, I will measure it this evening and let you know.
(10-02-16, 01:59 PM)unfazed link Wrote: I have a spare nut and washer kit (90891-10124) one at home, I will measure it this evening and let you know.
That code is for the 12mm one, i've seen it enough times on here.
More people are born because of alcohol than will ever die from it.
(10-02-16, 01:17 PM)Punkstig link Wrote: I know, that's why I'm asking if he's measured it- I'd assume the 12mm is still available but I didn't have the correct part number at the time and the 10mm (measured myself) is the one on the computer system)
Every little helps, as they say, i s'pose!
More people are born because of alcohol than will ever die from it.
Yes -can confirm part no 90179-18006 is the 12mm size-just measured to check!
