FZ6 extended clutch slave lever
|
FZ6 extended clutch slave lever
|
15-09-15, 06:27 PM
Hi
Would anyone on here know where its possible to buy an extended clutch slave lever for a 2005 reg bike Thanks in advance 
15-09-15, 08:59 PM
I doubt if there is such a thing, if you want one because the clutch is heavy to use it may just need oiling. To do this get a plastic bag, disconnect the cable from the handlebar lever, cut a corner out of the bag just enough to get the nipple through then tape it to the cable outer to form a funnel. Put some light oil in the funnel and leave for a while, (tie it up) moving the inner cable too and frow will help, this can be done from the other end, or you could buy a cable oiler.
15-09-15, 09:33 PM
Apparently there is a modified lever available but no idea where from
Al gee u " go to the gym"!!! 
15-09-15, 10:57 PM
Shorty chinese levers are good and can help reduce clutch hand pain, search for it on the forum.
Also, when it gets a bit stiff :rolleyes it might be time to replace the cable if lubing it don't make much difference.
Treat everything in life the way a dog would- if you can't eat it or foc it, forget it.
15-09-15, 11:41 PM
(15-09-15, 09:33 PM)davy41 link Wrote: Apparently there is a modified lever available but no idea where fromSorry but you did kind of ask for it Issue I see with extension on the lever is how you going to take advantage of the extra leverage if it extends beyond the bar?
Complete fabrication, I didn't make it up!
|
|
« Next Oldest | Next Newest »
|
