Paddock stand bobbins

[Brettholmes89]

I've got a 1999 fazer 600, want to put some bobbins on for the paddock stands I've just got. Anyone put them on? Is there a certain place to pu them on the swing arm or is it just a case of drill and tap?

I can make my own I just want to clarify where to put them ?

[joebloggs]

Weld some bar to underside of the arm then drill and tap that. Not done it but wouldn't want the weight of the bike hanging on 3mm of thread

[Brettholmes89]

I've drilled and tapped the swing arm. Two m6 bolts. A 8.8 6mm has about 1.6 shear capacity so a fazer isn't going to shear two m6 bolts.



Quickly turned some out of aluminium and gave them a quick polish.

[joebloggs]

I've drilled and tapped the swing arm. Two m6 bolts. A 8.8 6mm has about 1.6 shear capacity so a fazer isn't going to shear two m6 bolts.



Quickly turned some out of aluminium and gave them a quick polish.

You bolting them straight to the arm?

Pictures please