+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: Paddock stand bobbins (/showthread.php?tid=76083)
Paddock stand bobbins - Brettholmes89 - 09-07-16
I've got a 1999 fazer 600, want to put some bobbins on for the paddock stands I've just got. Anyone put them on? Is there a certain place to pu them on the swing arm or is it just a case of drill and tap?
I can make my own I just want to clarify where to put them
?
Re: Paddock stand bobbins - joebloggs - 09-07-16
Weld some bar to underside of the arm then drill and tap that. Not done it but wouldn't want the weight of the bike hanging on 3mm of thread
Re: Paddock stand bobbins - Brettholmes89 - 10-07-16
I've drilled and tapped the swing arm. Two m6 bolts. A 8.8 6mm has about 1.6 shear capacity so a fazer isn't going to shear two m6 bolts.
![[Image: d772ae80894e992bcc94dbc86315e2dc.jpg]](http://uploads.tapatalk-cdn.com/20160710/d772ae80894e992bcc94dbc86315e2dc.jpg)
Quickly turned some out of aluminium and gave them a quick polish.
Re: Paddock stand bobbins - joebloggs - 11-07-16
(10-07-16, 09:13 PM)Brettholmes89 link Wrote: I've drilled and tapped the swing arm. Two m6 bolts. A 8.8 6mm has about 1.6 shear capacity so a fazer isn't going to shear two m6 bolts.
Quickly turned some out of aluminium and gave them a quick polish.
You bolting them straight to the arm?
Pictures please