(me again!) What is this called and where do I get one??

[HJFazer]

Hi,


So I feel like maybe my bike is falling apart, given how I seem to be on here with issues quite a lot!


However, I do have a new issue and am hoping someone can help out. So yesterday I noticed my front brake wasn't activating the light. Having looked I could see that one of the wires had come loose from the connector of the Front Light Break switch. It should be an easy fix however annoyingly I can't get the wire to stay back in the connector and have currently fixed it using masking tape and hope  :rolleyes


This is a photo of the connector I'm trying to replace, I wondered if anyone had any ideas what they were called/where I could get one?


http://screencast.com/t/ouUeHfrVre


In case my description is terrible, this is what it connects to:


http://screencast.com/t/wVj86DINdWB


I really can't figure out what it's called in order to try and get a replacement, the current one is set so tight I don't think i can undo it and I'm not sure how long the Tape will hold so any help would be epic!


Thanks again


HJFazer

[Gnasher]

Pop along to your local motorfactors or halfords and take the connector with you it's called a right angle spade connector.

[HJFazer]

Thanks Gnasher! Much appreciated!

[bigsteve]

If you have no luck in stores these may help but check size and order
http://www.ebay.co.uk/itm/25-x-BLUE-6-3m...43a1425291

[Paulfzs]

the same thing happened to mine last week i just used a straight spade connector that i got off ebay. works fine.