rear brake

[carlos]

Hi guys first post on here and straight into a question on the back brake
have found I need new seals and pistons for the rear caliper
do I use pattern parts about 60 quid or oem yamaha parts about 100
any experiencewith pattern parts   

[unfazed]

Go with the OEM stuff, always like to know my brakes will work when I need them. :lol

[Fazer Forever]

Seconded. Easy mod and about ten times better braking. Almost too good if you get carried away.

[carlos]

thank you for the replies the 1000 caliper sounds good but have heard they are hard to find

[carlos]

is the xjr1300 a slot in with no mods do all years fit a fzs600??
anyone done this

[Fazer Forever]

I've fitted a 1000 calliper so if the XJR1300 is the same then it's dead easy. You don't modify the calliper at all,
just file a bit off the bracket until the calliper bolts to it properly. It's obvious what to do when you have the bits in your hands.

[noggythenog]

Hey Fizzy


Dont suppose next time your at the bike you could measure centre to centre on the torque arm could you.




I'd really hate to not use my bling  :faz  Etched one. :'(

[noggythenog]

240mm between centres nog

Cheers geezer! :thumbup






Hey fizzy i checked my torque arm...240mm so they're the same size which means i can use my bling one when i fit my thou caliper.




For some reason i thought the 600 & thou had different length arms but the thou one must have just looked longer because of its design.

[carlos]

thanks again guys no doubt I will be back soon for more help

[Fazer Forever]

What torque arm is that Fizzy? Looks good, much nicer than standard.

[Fazer Forever]

Cheers.

[noggythenog]

[quote author=Fizzy Pies link=topic=11882.msg131128#msg131128 date=1393781481]
240mm between centres nog

Cheers geezer! :thumbup


[/quote]




Hey fizzy i checked my torque arm...240mm so they're the same size which means i can use my bling one when i fit my thou caliper.




For some reason i thought the 600 & thou had different length arms but the thou one must have just looked longer because of its design.

[noggythenog]

[quote author=noggythenog link=topic=11882.msg131449#msg131449 date=1393881339]
For some reason i thought the 600 & thou had different length arms but the thou one must have just looked longer because of its design.

The fzs600 and thunerdace arms are both 240mm mate but I'm sure the fzs1000 torque arm is different mate
[/quote]




Ok geezer.......but the main thing is that you've managed to fit the thou caliper with a 240mm torque arm which is good, maybe if it is a different size then it just means that the caliper is slightly further round on the disc......or maybe the thou has a bigger disc so needs a longer arm to bridge the gap?????

[Chris]

[quote author=Fizzy Pies link=topic=11882.msg131461#msg131461 date=1393882139]
[quote author=noggythenog link=topic=11882.msg131449#msg131449 date=1393881339]
For some reason i thought the 600 & thou had different length arms but the thou one must have just looked longer because of its design.

The fzs600 and thunerdace arms are both 240mm mate but I'm sure the fzs1000 torque arm is different mate
[/quote]




Ok geezer.......but the main thing is that you've managed to fit the thou caliper with a 240mm torque arm which is good, maybe if it is a different size then it just means that the caliper is slightly further round on the disc......or maybe the thou has a bigger disc so needs a longer arm to bridge the gap?????
[/quote]

As you said mate, it just means it's further around the disc, slightly further from anchor point on swing arm. Shouldn't make any difference what length it is, as long as there is enough slack in the brake line to reach it. A few cm shouldn't hurt.

[noggythenog]

Cheers chris




Ye im always on about wanting another bike but i cant help myself buying more bits for this one.




Suspension & brake lines then I've pretty much replaced everything :eek

[Chris]

Suspension & brake lines then I've pretty much replaced everything :eek

Apart from the muppet riding it  :b  :eek

Chris

[noggythenog]

[quote author=noggythenog link=topic=11882.msg131556#msg131556 date=1393926178]
Suspension & brake lines then I've pretty much replaced everything :eek

Apart from the muppet riding it  :b :eek

Chris
[/quote]




Oi ya bass!!! :lol

[ChristoT]

[quote author=Chris link=topic=11882.msg131631#msg131631 date=1393951068]
[quote author=noggythenog link=topic=11882.msg131556#msg131556 date=1393926178]
Suspension & brake lines then I've pretty much replaced everything :eek

Apart from the muppet riding it  :b :eek

Chris
[/quote]




Oi ya bass!!! :lol
[/quote]

Sounds right to me!! :lol :lol :lol

[noggythenog]

:b

[Chris]

:b

:rollin