09-03-12, 08:01 PM
well off to charge my battery after it went flat on tuesday and noticed that the positive bolt is actualley a allen key domed bolt, can you get another bolt if so from where and what size?
thanks
thanks
|
battery bolts
|
 
09-03-12, 09:17 PM
cheers rich but dont need a new battery just the bolt as the allen key holes are knacked would love to have a philips/hex bolt just in case i break down so i can use the screwdriver in the kit but cant find one on ebay :'(
09-03-12, 09:55 PM
full licenses don't come in cornflake packets!
09-03-12, 10:01 PM
Normal steel bolts should be fine as long as the metal to metal contact is clean. As always with batteries a little grease on the terminals after you have tightened them is good to prevent corriosion.
full licenses don't come in cornflake packets!
09-03-12, 10:04 PM
If it's the same as the FZS, the standard bolts are hex with a Philips slot in them anyway. If you can get one out it goes into a square nut under the terminal. Any hardware, motor factors or even B&Q should be able to supply you with a couple of bolts with the right thread.
10-03-12, 07:49 PM
Its a standard short 10mm bolt. I lost one and replaced it with one from my kids swing.
They provide a hexagon top with a philips slot just so you can undo it with either tool How thoughtfull eh?  .An allen bolt would be OK with me if it was the right length 
10-03-12, 07:56 PM
(10-03-12, 07:49 PM)Major Rant link Wrote: Its a standard short 10mm bolt. I lost one and replaced it with one from my kids swing. Did the swing fall apart??? :rollin
Red Heads - Slowly taking over the world!!!
10-03-12, 11:03 PM
Quote:Did the swing fall apart??? We'll find out on the first warm Saturday of the year. 
10-03-12, 11:16 PM
thanks guys went to the local moto x center near by and hey presto two proper battery bolts with nuts for the pricly sum of a smile :lol
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: