carburator mixture screw adjustment

[kevt]

Hi can anyone tell where and what sort of screwdriver I need to adjust the fuel mixture with the carbs still fitted. Have looked at right angled screwdriver but not sure if they will fit
thanks for your help
kev

[Falcon 269]

You need a special 90 deg 'driver for this job - most you find Halfords and other tool shops aren't thin enough to get at the carbs over the starter motor. 

Not cheap. 

[Andy FZS]

Is that a screwdriver that's bent or one with a ratchet type mechanism

[Tmation]

You need one of these http://www.amazon.com/Motorcycle-Mixture...B005SUU2HS


Or from the UK [size=78%]http://www.amazon.co.uk/Laser-5067-Mixtu...+90+Degree[/size]


http://www.amazon.co.uk/Sealey-MS013-Pil...7266EEB20P


Or the big boys version [/size][size=78%]http://www.amazon.co.uk/Sealey-VS0530-Dr...5Q9V23AST6[/size]