Bike going for MOT tomorrow, a quick check over shows no obvious problems, but finally got around to adjusting the headlamps, which were way too high. But they seem to be pointing a bit to the right - only slightly, but puzzling, as it's defo a UK model and has sailed through all previous tests as far as I can tell from all the paperwork I've got. So I tried adjusting this, and although the horizontal adjustment screws turn (if a little stiff), they don't seem to be doing a great deal. Any views/knowledge on this?
Had to do a slight adjustment up after fitting R1 forks, and had no problem, but didn't make any adjustment left or right so can't comment further.
Some say that he eats habanero chilli peppers dipped in oil of capsaicin for extra bite and that his pyjamas are made from Nomex. All we know is, he's called Ad the Bad
shouldnt fail you on that lol if he a decent bloke will just alter it for you free of charge mine does and more, like the odd dodgy elec connection or any daft jobs like that then he does and doesnt charge and we have a natter and a cuppa lol
get to know your local mot :evil :evil :evil guy
"Dont confuse my personality with my attitude My personality is who I am. My attitude depends on who you are..."
