|
head light
|
04-10-12, 11:44 AM
hi buddies , dose any one know or has done this , put foxeye head light from a 02/03 on a 99 gen 1 fazer ?
will it bolt straight on ? if so is it easy to do . the only other thing is to put two round head lights / one big one any help guys ????????? thanks 
04-10-12, 02:20 PM
I have the 2002-3 fairing on my 98 if that's what you are asking?
the headlamps won't fit the gen 1 fairing though, even looking at it should tell you that 
04-10-12, 07:41 PM
Agree with above. There is also a bit of re-wiring required as the 2002/2003 uses two twin filament bulbs were as the Mk1 model uses one single filament bulb (for dip) and one filament of the two filament bulb (for main beam). Assuming you have not done the Mk1 lighting mod of course. There are also two pilot lights in the Mk2 if you want to use them. If you compare the wiring diagrams for the two models you will see it's a different layout for the headlamp bulbs.
I have a wiring diagram I did for these changes which I can attempt to post on here if you need it.
04-10-12, 09:18 PM
cheers guys, i know the fairing wont fit as i was going to change the lot . may wait until next year and a newer bike ie 02 upwards .
05-10-12, 08:26 AM
05-10-12, 10:25 PM
i have just brought a 2002 fazer with the fox eyes.. pick it up in a week waiting for the shop to get it tested etc.. does anyone no what the lights are like on them? thanks carl.
08-10-12, 07:52 AM
not as bad as the earlier ones, especially if both are on together. Still not brilliant though.
10-10-12, 08:02 AM
fairing mount is totally deferent also the 2 small mounts on the side of the frame are in a diferant place
10-10-12, 08:14 AM
10-10-12, 03:41 PM
if you use the main mount / light unit /fairing yes it will fit
11-10-12, 08:20 AM
11-10-12, 10:26 AM
|
|
« Next Oldest | Next Newest »
|
