FZS 1000 Front engine mount bracket bushes.

[Decoke Dave]

      Should the four steel spacers be lubricated in their bushings within the bracket assembly, if so what type of grease is officially recommended for this job, if any. 

[teecee90]

Not sure what spacers you are referring to. The service manual doesn't mention the need for any lubrication but I usually put a bit of anti-seize on the engine mounting bolts.

[teecee90]

Actually, I think I know what you mean. I seem to remember there are 4 seals that I think go either side of upper/front mounting point/bushings in the bracket. Interesting that they are not shown separately in the service manual or listed on Fowlers. I think I did put a bit of bearing grease on the bushes and seal lips.

[b1k3rdude]

but I usually put a bit of anti-seize on the engine mounting bolts.

+1