+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: Fazer 1000/FZ1 corner (https://foc-u.co.uk/mybb/forumdisplay.php?fid=75)
+--- Thread: FZS 1000 Front engine mount bracket bushes. (/showthread.php?tid=82292)
FZS 1000 Front engine mount bracket bushes. - Decoke Dave - 22-03-21
Should the four steel spacers be lubricated in their bushings within the bracket assembly, if so what type of grease is officially recommended for this job, if any.
Re: FZS 1000 Front engine mount bracket bushes. - teecee90 - 22-03-21
Not sure what spacers you are referring to. The service manual doesn't mention the need for any lubrication but I usually put a bit of anti-seize on the engine mounting bolts.
![[Image: aRpPUUpl.jpg]](https://i.imgur.com/aRpPUUpl.jpg)
Re: FZS 1000 Front engine mount bracket bushes. - teecee90 - 22-03-21
Actually, I think I know what you mean. I seem to remember there are 4 seals that I think go either side of upper/front mounting point/bushings in the bracket. Interesting that they are not shown separately in the service manual or listed on Fowlers. I think I did put a bit of bearing grease on the bushes and seal lips.
Re: FZS 1000 Front engine mount bracket bushes. - b1k3rdude - 22-03-21
(22-03-21, 01:43 PM)teecee90 link Wrote: but I usually put a bit of anti-seize on the engine mounting bolts.+1