Renthal 758

[Kenbob]

are renthal 758s ok to use on the 600, I have a spare set well, going spare really.

[Arfa]

Yeah, work fine. Bit wider, and you'll need different bar ends. Got pair on mine at mo, you need to get them at right angle so they don't clash with fairing/mirrors or tank, but no big deal. The width took a bit to get used to and can be a bit of stretch for full lock.


Some pics on my blog here:
http://www.beginnerbiker.com/2015/06/ren...rs-review/

[Kenbob]

Cheers, will get hem swapped over.

[mtread]

And you'll either need to drill location holes for the tabs on the switch gear, or tape up the area to stop them rotating. Apparently Renthal advise against drilling, but I did.

[Grant1Shepherd]

More than ok, I put a set on my Fazer 600 and haven't regretted it since, feels so much more comfortable now 

[Buzz]

And you'll either need to drill location holes for the tabs on the switch gear, or tape up the area to stop them rotating. Apparently Renthal advise against drilling, but I did.

Yeah, I filed off the location tabs then used 3 or 4 layers of silver foil between the switch gear and the bars, nothing's moved in 4 years.  I didn't fancy drilling holes in mine.

[Grant1Shepherd]

I don't know where all this talk of holes is coming from? :rollin I didn't have to drill a single hole in mine when I put them on

[Chris]

So much better than the standard bars. I filed down the tabs a bit and they've been fine =)

Chris