+- Fazer Owners Club - Unofficial (https://foc-u.co.uk/mybb)
+-- Forum: Bikes, Hints'n'Tips (https://foc-u.co.uk/mybb/forumdisplay.php?fid=66)
+--- Forum: FZS600 Fazer (https://foc-u.co.uk/mybb/forumdisplay.php?fid=78)
+--- Thread: Renthal 758 (/showthread.php?tid=78452)
Renthal 758 - Kenbob - 14-07-17
are renthal 758s ok to use on the 600, I have a spare set well, going spare really.
Re: Renthal 758 - Arfa - 14-07-17
Yeah, work fine. Bit wider, and you'll need different bar ends. Got pair on mine at mo, you need to get them at right angle so they don't clash with fairing/mirrors or tank, but no big deal. The width took a bit to get used to and can be a bit of stretch for full lock.
Some pics on my blog here:
http://www.beginnerbiker.com/2015/06/renthal-758-ultra-handlebars-review/
Re: Renthal 758 - Kenbob - 15-07-17
Cheers, will get hem swapped over.
Re: Renthal 758 - mtread - 15-07-17
And you'll either need to drill location holes for the tabs on the switch gear, or tape up the area to stop them rotating. Apparently Renthal advise against drilling, but I did.
Re: Renthal 758 - Grant1Shepherd - 15-07-17
More than ok, I put a set on my Fazer 600 and haven't regretted it since, feels so much more comfortable now
Re: Renthal 758 - Buzz - 17-07-17
(15-07-17, 12:48 PM)mtread link Wrote: And you'll either need to drill location holes for the tabs on the switch gear, or tape up the area to stop them rotating. Apparently Renthal advise against drilling, but I did.
Yeah, I filed off the location tabs then used 3 or 4 layers of silver foil between the switch gear and the bars, nothing's moved in 4 years. I didn't fancy drilling holes in mine.
Re: Renthal 758 - Grant1Shepherd - 17-07-17
I don't know where all this talk of holes is coming from? :rollin I didn't have to drill a single hole in mine when I put them on
Re: Renthal 758 - Chris - 19-07-17
So much better than the standard bars. I filed down the tabs a bit and they've been fine =)
Chris