Author Topic: Downpipe choices (Read 34967 times)

HJFazer · « **Reply #75 on:** 08 February 2016, 05:20:13 pm »

risticuss - are they motad? If so were they direct from Motad on eBay?

Punkstig · « **Reply #76 on:** 10 February 2016, 11:59:32 am »

I'd guess they're Motad as they have the link pipes from 1-2 and 3-4, I don't think any other aftermarket exhaust has these

AdamC · « **Reply #77 on:** 14 February 2016, 07:08:59 pm »

I saw some Lextek downpipes at the MCN show today, £130 normally but on show offer at £115. No 1-2 & 3-4 link pipes but tempting price. Has anybody tried them?

fazersharp · « **Reply #78 on:** 14 February 2016, 07:44:54 pm »

Quote from: AdamC on 14 February 2016, 07:08:59 pm

I saw some Lextek downpipes at the MCN show today, £130 normally but on show offer at £115. No 1-2 & 3-4 link pipes but tempting price. Has anybody tried them?

Got a feeling they are Chinese -- good or bad - don't know, others would say cheep Chinese parts look the "the part" but thats as far as they go.
But like I said I dont know if they are Chinese, only done a quick google.

bandit · « **Reply #79 on:** 14 February 2016, 08:53:43 pm »

I would say they are not Motad as I can't see the centre stand bracket that the stopper on on the stand hits.

AdamC · « **Reply #80 on:** 15 February 2016, 04:01:58 pm »

I'm pretty certain they're Chinese, they're definitely Motad (who quoted me £305 at the show

AdamC · « **Reply #81 on:** 15 February 2016, 04:08:18 pm »

So interested to hear any user feedback on the Lextek.

AdamC · « **Reply #82 on:** 15 February 2016, 04:10:37 pm »

Quote from: AdamC on 15 February 2016, 04:01:58 pm

I'm pretty certain they're Chinese, they're definitely Motad (who quoted me £305 at the show

*not Motad

risticuss · « **Reply #83 on:** 16 February 2016, 07:06:40 am »

They were direct from Motad through eBay.
The centre stand bracket is on the link pipe by the way.

bandit · « **Reply #84 on:** 16 February 2016, 09:06:47 am »

Sorry risticuss,forgot the stand bracket was on the link pipe,when you put them on did you find the clamps that bolt to the head bend when tightened easily.

risticuss · « **Reply #85 on:** 16 February 2016, 01:30:42 pm »

I did notice that, as well as the fact that they're quite a bit thicker and so I struggled to get the nuts on more than I should have.

sc0ttie · « **Reply #86 on:** 18 February 2016, 09:26:11 pm »

Quote from: HJFazer on 02 February 2016, 01:15:30 pm

Hi All... and more specifically Pickle I think...

It has now come the time where I need to replace my original downpipes and rather than start a new thread I figured I'd message on here.

Pickle - what was the best price you got from Motad? I'll be calling next week but figured I should see what they offered you before i do.

Thanks

HJFazer

Did you call and get that price? I think I may have to do this also but I wondered how you got on?

Bimbam · « **Reply #87 on:** 19 February 2016, 09:40:14 am »

I see at lot of posts about this topic.
Why not buy the orginal downpipes?
My downpipes is from 1998 and are fine, so the quality must be ok. (not perfect)

fazersharp · « **Reply #88 on:** 19 February 2016, 01:41:15 pm »

Quote from: Bimbam on 19 February 2016, 09:40:14 am

I see at lot of posts about this topic.
Why not buy the orginal downpipes?
My downpipes is from 1998 and are fine, so the quality must be ok. (not perfect)

Are you sure!
I am a dry rider only "98" and just seen 3 or 4 pin prick holes in the collector area (same place as the OP ). Have a lay down and look underneath.
I think the rot mainly from the inside via condensation - water vaper.
But you are right no one ever talks about fitting standard OEM steel pipes which brings me to the question can you even get them and if so are stainless steel ones cheaper.

Bimbam · « **Reply #89 on:** 19 February 2016, 04:01:10 pm »

Now i checket and i have no holes. (lucky?) The bike has only gone 52.000 km.

I will check avability and price at the local Yamaha dealer.
But i dont expect answers i the weekend.
I will keep you posted

fatboy · « **Reply #90 on:** 19 February 2016, 05:31:56 pm »

Still available from Yamaha, bit pricey mind
https://www.fowlersparts.co.uk/parts/4165898/fzs600-fazer-5dm7-2000-070-b/exhaust

fatboy · « **Reply #91 on:** 19 February 2016, 05:41:49 pm »

Got a set on mine from sandy bike spares, been on about 4years.no problems so far.
Regards Adrian

fazersharp · « **Reply #92 on:** 19 February 2016, 07:15:37 pm »

Quote from: fatboy on 19 February 2016, 05:31:56 pm

Still available from Yamaha, bit pricey mind
https://www.fowlersparts.co.uk/parts/4165898/fzs600-fazer-5dm7-2000-070-b/exhaust

£761.63
excl. VAT
You are not wrong there
I wouldnt mind new standard ones if only they were cheaper than better quality stainless ones

Bimbam · « **Reply #93 on:** 19 February 2016, 09:19:54 pm »

Now i got the price in Denmark = 1080 GBP. Auch

Now i know why you want another.

Bimbam · « **Reply #94 on:** 22 February 2016, 08:23:07 pm »

Hi again

Finally got the price on Micron downpipes. It is 470 GBP.
Anybody know The Micron downpipes?

risticuss · « **Reply #95 on:** 23 February 2016, 11:19:42 am »

I thought Micron had gone bust.

The thing that gets me about the second hand OEM downpipes that are sometimes up for sale on eBay, they're usually rusty as anything, and the sellers want £150 usually. Might as well buy a stainless set for not much more, OEM or not.

fazersharp · « **Reply #96 on:** 23 February 2016, 01:03:21 pm »

Even if they look good on the outside they may still be shot on the inside at the collector area, its a water trap there

sc0ttie · « **Reply #97 on:** 23 February 2016, 06:02:47 pm »

Quote from: fazersharp on 23 February 2016, 01:03:21 pm

Even if they look good on the outside they may still be shot on the inside at the collecter area, its a water trap there

This is what has stopped me from buying any used from ebay, you just cant tell how the inside is, most of them look corroded on the outside anyway so an indication of the inside and miles they did already. I am getting a set of new Motad header pipes next month, I have had to do a temporary repair on my collector box for now as I have already got rear tyre and clutch to replace this month.

bandit · « **Reply #98 on:** 23 February 2016, 07:13:06 pm »

Start soaking those header nuts with plusgas spray well before trying to remove them. Good luck.

Fergus · « **Reply #99 on:** 24 February 2016, 08:18:15 am »

Hi all, Just a quick heads up,
I saw Motad headers listed on ebay yestarday for £165.00, I rang Motad, who said they shouldn't be listed at that price....He looked up the ebay post and said they would honour the listing and have shipped them to me for the quoted ebay price....