Date: 23-05-24  Time: 06:30 am

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - bwizz

Pages: 1 2 [3] 4 5 ... 15
51
For Sale & Wanted / Re: Any CR9E Plugs going cheep
« on: 21 April 2014, 06:33:47 pm »
whats the difference then EK ?

52
For Sale & Wanted / Re: Any CR9E Plugs going cheep
« on: 21 April 2014, 04:38:52 pm »
There are some clever scam sites which lure you in with headline cheap prices , then go to checkout , mega postage ! Don't ask you don't get though!

53
Fazer 1000/FZ1 corner / Re: Noisy Exup
« on: 21 April 2014, 04:28:06 pm »
As the thou was running quite rough on the last trip . i have taken thge plugs out for a look at them, Only one looks to be a nice colour. would a sticky exup do this?
I checked the carb balance recently so pretty sure thats ok. I'll get some new plugs in the interim as its due for some.

54
For Sale & Wanted / Any CR9E Plugs going cheep
« on: 21 April 2014, 04:19:32 pm »
After a set of plugs for my thou , any going cheep before I  go mad
They were £1 each when I were a lad :D

55
Fazer 1000/FZ1 corner / Re: Noisy Exup
« on: 19 April 2014, 10:02:31 am »
I've just had a geek this morning , the cables are free and adgustment is fine , only a little tightness in the exup spindle. I'll clean it up regrease and try out . I'm glad of the pictures because it was not obvious where the spacer washer came from

56
Fazer 1000/FZ1 corner / Noisy Exup
« on: 18 April 2014, 07:18:38 pm »
Just started to use my thou again . I don't have any exup tach error code but its making quite a racket, I can even feel the clacking through the footrests.
Any ideas guys.

57
General / Re: r6shock
« on: 12 March 2014, 07:36:13 pm »
In my humble opinion 600's don't suffer from wallowing  to the same extent as the thou. certainly not at low mileage .

58
General / Re: sat nav
« on: 12 March 2014, 07:31:03 pm »
Ive got an old navigo 3.5 with tt europe software and e generic handlebar clamp. used if for years now , not waterproof but you pays yer money etc .invaluable. I find it hard to switch back to normal , watching signpost mode though , navigate one way or the other don't try to do both at once.

59
Fazer 1000/FZ1 corner / Re: Clonking noise on drive
« on: 16 February 2014, 05:40:30 pm »
First timeout "since the weird noise" on the thou today .In the interim I've checked for anything obvious . Now thinking the noise is the exup valve, no error code though! must be noisier though as my partner can hear from the pillion.

60
Fazer 1000/FZ1 corner / Re: Clonking noise on drive
« on: 19 January 2014, 07:27:14 pm »
There was no noises for the first 20 miles or so, maybe broken chain links though

61
Fazer 1000/FZ1 corner / Re: Clonking noise on drive
« on: 19 January 2014, 07:25:37 pm »
No I did a viual check of obvious culprits!

62
Fazer 1000/FZ1 corner / Clonking noise on drive
« on: 19 January 2014, 06:57:39 pm »
Just took my thou out for the first time this year. No exup hick ups despite the 4 month lay up. but I noticed a stange clonking sound at low speed ,Seems around the chain front sprocket area , got me home alright but not investigated yet. anybody had this issue with a thou, The noise did not relate to wheel speed so I don't think its a bearing.

63
Fazer 1000/FZ1 corner / Re: exhaust cat ?
« on: 19 January 2014, 06:51:03 pm »
They are riveted onto the collector box easy job to remove

64
For Sale & Wanted / Fuel Tank sender unit for mk 1 600
« on: 08 January 2014, 05:54:13 pm »
I bought this sender unit some time ago for my previous 98 600 Fazer I payed £10 for it + pp Still in the unopened box
I'd like £10 +PP Redruth area Cornwall

65
For Sale & Wanted / Fazer 600 mk 1 Black Frontpipes
« on: 08 January 2014, 05:50:57 pm »
I have a set of standard black front pipes from my 98 600, These need a good clean and paint. they are sound and no holes £50+ postage  approx £10 Or local collection Redruth area of Cornwall
I'll try them here before I e bay them!

66
FZS600 Fazer / Re: fazer thou rear caliper
« on: 27 December 2013, 03:31:14 pm »
I've fit a thou one to my 600 recently , main reason was that I wanted the 600 to feel similar in the braking department. I got stung by UK import duty when I imported one from the states "via e bay" at first I did not think it worth the a approx £100 , Now the pads have bedded into the disk, there is a huge improvment , I use a back brake a lot ,and now find much easier to feather the rear brake.Don't think i'd bother though if i didn't have the thou to compare it with, Payes yer money etc!

67
General / Re: Heated Grips
« on: 23 December 2013, 01:47:34 pm »
I had some volcanic heat battery gloves , absolutely useless, lasted 40 mins if lucky. the polar 12v jackets are really good , best if you put a kidney belt over them , presses the heating elaments nearer to thge body

68
General / Re: Heated Grips
« on: 22 December 2013, 04:09:53 pm »
Heated Jackets.  I notice that the cheep heated jackets which my partner and myself wear are again on e bay £48 but still a ,best bike related gadget /gear I have ever bought. Their called polar something or other   
 
 
 
 
 
 
 

69
FZS600 Fazer / Re: Fuel Gauge Problem
« on: 14 December 2013, 07:29:45 pm »
I've a tank sender unit if you need one £12+pp

70
FZS600 Fazer / Re: Torque Arm Mod?
« on: 27 November 2013, 03:26:50 pm »
At a glance the Thunderace and Thou for that matter, torque arms looks like they are made from Aluminium , I thought as much before I got one, prettier than the 600 standard article though!
Also some people refer to aluminium as alloy !
I hope this cleers the mud

71
FZS600 Fazer / Re: 600 any probs
« on: 19 November 2013, 05:52:00 pm »
Most of us have double standards re mileage, I'm happy to own one at 38000 but I would not buy one

Also check the fairing infills line up properly, can be a sign of of a crashed bike

72
FZS600 Fazer / Re: Torque Arm Mod?
« on: 19 November 2013, 05:44:17 pm »
Just bought one , of Motorbreath ta
The Thunderace ones look better than the 600 ones , but they are not much lighter being made of some sort of alloyed steel .
so don't get one to save weight. I am quite happy with the improved apearence of the swing arm I finished it of with stainless steel allen screws, I got some extra m8 ones for my thou, "which has been badly neglected this season

73
Fazer 1000/FZ1 corner / Re: 600 to 1000.....why should i do it?
« on: 16 November 2013, 07:09:39 pm »
I have a 02 600 and a 05 1000  ,The 600 has better wind protection,and in my humble opinion a  better all rounder.
1000 is great 2 up, totally flattens hills.

74
FZS600 Fazer / Re: Cheap mods
« on: 06 November 2013, 08:35:07 pm »
1000 shock is a good mod , I find it so good i don't see the point of going down the R6 shock route
Another cheepo mod i've done is put a switch on one of the dip headlights  saving 50 watts of fuel or leaving more for heated grips etc

75
FZS600 Fazer / Re: headlamp bulbs
« on: 06 November 2013, 08:26:05 pm »
If you have done the "making both lights work on dip mod"  then I don't think you will gain much improvement with the box eye headlamps,  you could end up melting the lens assembly by going more amps route. I tried better bulbs in my car but there was not much improvement, I suppose HID lamps are an option ,but iv'e no experience of them , expensive to !

Pages: 1 2 [3] 4 5 ... 15