|
No respect!!
|
05-09-17, 02:29 PM
(This post was last modified: 05-09-17, 02:32 PM by matt7chunk.)
parked my bike in town for 10 minutes come back and notice this on the front of my bike!! no fucking respect! really deep gna have to cover with this i reckon http://www.ebay.co.uk/itm/YAMAHA-3D-DOME...2749.l2649
https://photos.app.goo.gl/xO7gY5XLwAiBYFkA2 any other ideas?
Set Fazer's to stun
05-09-17, 02:44 PM
bastards
- i wouldnt get the domed one like that as it will might try and peel itself away from a curved surface its designed to go on flat stuff i think - maybe just wet sand out the scratch and use a metalic silver touch up pen technically clean, use toothpick to fill scratch - wetsand scratch and excess touchup out as best as possible without removing all of the clearcoat this is overkil but will give you the idea https://www.youtube.com/watch?v=S2aC_oseMe4
riding this that and the other
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ https://www.instagram.com/disorderly_punk_yt/ 
05-09-17, 05:15 PM
Any cameras in the area (criminal damage)?
There'll be a regional Police force CCTV contact number, where they might just be able to retrieve some footage? Makes your blood boil. I'd just buy a new Screen.
05-09-17, 06:24 PM
(05-09-17, 05:15 PM)F4celess link Wrote: Any cameras in the area (criminal damage)? -thats not on the screen though its on the fairing itself
riding this that and the other
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ https://www.instagram.com/disorderly_punk_yt/
05-09-17, 07:42 PM
Quote:-thats not on the screen though its on the fairing itself Apologies, was viewing on the mobile. Didn't see the picture properly. Could it be sanded down and rattle can sprayed? Or will need filling. 
05-09-17, 08:05 PM
I really don't get what pleasure wankers get from doing shit like that ?? my wife's cars been scratched 6 times outside our house and my car about 4, it really pisses me off.
I would get another Yamaha decal, flatten the scratches down very carefully maybe 1200 wet and dry ?? Then use a touch up pen or paint on a toothpick or very fine paintbrush put the Yamaha decal over the original as most of the scratch is on the decal. Then hope Karma does its job and the wankers get it back 4 fold
05-09-17, 08:25 PM
such small amount of the decal damaged - could just use a mettalic silver
next sticker might not be same size and are (on tank at least) under the clearcoat
riding this that and the other
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ https://www.instagram.com/disorderly_punk_yt/
05-09-17, 10:08 PM
It's really deep scratch , at the mo I have pulled the decal off and have rubbed down the lips with 1200 and filled the scratch with scratch pen clear coat , going to let that cure then flatten with 2000 and polish out , wish me luck .
Wankers probably wish they had there own bike but don't because it's hard to save up at the job centre. C##ts!
Set Fazer's to stun
11-09-17, 01:25 PM
God knows what goes through someone's mind!!
Poor Fazer!!!
11-09-17, 01:38 PM
Finished the fix now , not perfect but the best I could manage with what I have.
What you think? https://photos.app.goo.gl/MNz8WM9AAHWAGRJP2
Set Fazer's to stun
11-09-17, 05:23 PM
looking good
riding this that and the other
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ https://www.instagram.com/disorderly_punk_yt/
11-09-17, 05:52 PM
(This post was last modified: 11-09-17, 05:56 PM by matt7chunk.)
My first attempt at body work lol you can see where I buzzed through clear coat behind the second A , tried to correct it with more clear then flatting that but just kept lifting and looking worse, so I cut my loses and stuck the decal on haha
Set Fazer's to stun
11-09-17, 05:55 PM
(11-09-17, 05:23 PM)Disorderlypunk link Wrote: looking goodcheers dude , how are you liking your black widow exhaust mate ? Been watching your youtube vids (subbed) thinking about getting this one myself http://www.blackwidowexhausts.co.uk/fzs6...6351-p.asp
Set Fazer's to stun
11-09-17, 06:48 PM
only issue i have with it is the baffle is well and truly stuck in there
but saying that its plenty loud enough to be noticed but not boys in blue noticed so i havent really tried to get it out definatly gets some attention when i open it up in town centres (i really should stop riding through center of kendal though as its ment to be taxis and buses only) i was looking at that exact same one but decided to go oval to keep it looking slimline (and traffic filtering freindly but ruined that now with wide renthals on)
riding this that and the other
vloggin some bits - https://www.youtube.com/channel/UCvWtJO9...R9RNHx72UQ https://www.instagram.com/disorderly_punk_yt/
12-09-17, 09:51 AM
I'm eyeing up a full Black Widow system, after seeing (on youtube) alot of owners of new MT-07's were running BW Cans and raving about them.
Although youtube vids never seem to do exhaust reviews justice.. you just don't get that deep rumble/vibratio (that we crave :evil ) coming through a computer screen! Likely go for a 300mm Silencer. They look a nice fit on the rear end of a Fazer (not too long or short) - still with decent back pressure, plus not a "shorty" which would be much louder. (11-09-17, 06:48 PM)Disorderlypunk link Wrote: ... Have you tried PUSHING (tapping) the muffler out from the inside? Using a piece of wood pushed through the silencer, from the link pipe end? (instead of using pliers to "pull" it out). |
|
« Next Oldest | Next Newest »
|
