Gen 2 Exhaust

[Gary]

I have a Gen 2 with a scorpion exhaust. I seem to have mislaid the baffle... on the road.  :eek  


Anyway, I have the original exhaust that I am considering throwing back on as I am finding the scorpion too loud and I can't find a suitable baffle/db killer.


If I was to put the original back on, what else would I need. bearing in mind all I got when I bought the bike was the exhaust unit. Nothing else .

[pilninggas]

I assume you mean the OEM silencer, rather than downpipes/collector too?

If it is only the silencer in theory you would need the cables for the exup valve (and possibly the servo), but as it is for noise suppression only (@5000 rpm it closes and then reopens at 5500ish), you can peg it open (i did mine, took a few minutes).

So you can probably open the exup valve up and bolt the silncer on, no fuss, no muss.

[PieEater]

Why not contact Scorpion to see if they can sell you another baffle for the can?

[Gary]

I had contacted Scorpion who had said they no longer supply this exhaust and have no baffles left.


PM rec'd. Sorted now, thanks Dek.