(13-06-16, 08:20 PM)sinto link Wrote: [quote author=unfazed link=topic=17296.msg234159#msg234159 date=1465844536]
Did the Bike Copper make any reference as to how some of the numbers fell off your reg plate :lol
:lol
When did the cops start advertising fast food outlets?
:rollin :rollin :rollin
[/quote]
I told him straight - they fell off whilst I was wheelieing over here officer! I think he would have been more bothered by the brand new Harley if he was looking at number plates, but it looked mean with the black and silver
I know, I thought it was all about the donuts, not the colonel's secret recipe!
Tightened the chain and pulled out the but plug (DB killer) in the exhaust, man it sounds good now . Can't wait to take her out for a good hard ride tomorrow morning and get her nice and wet or if it decides to be sunny again ride her dry :lol
(14-06-16, 07:49 PM)Fazer99 link Wrote: Can't wait to take her out for a good hard ride tomorrow morning and get her nice and wet or if it decides to be sunny again ride her dry :lol
And you could do the same to the bike! :rollin :rollin :rollin
Colin
----------------------
Ride fast, ride a red bike :-)
(14-06-16, 08:04 PM)sinto link Wrote: [quote author=Fazer99 link=topic=17296.msg234280#msg234280 date=1465930184]
Can't wait to take her out for a good hard ride tomorrow morning and get her nice and wet or if it decides to be sunny again ride her dry :lol
And you could do the same to the bike! :rollin :rollin :rollin
[/quote]
(14-06-16, 08:22 PM)fazersharp link Wrote: [quote author=Fazer99 link=topic=17296.msg234280#msg234280 date=1465930184]
pulled out the but plug in the exhaust,
Is that where you put it to warm it up first
[/quote]
Where else would you put it to warm it up :rollin :lol :rollin
Finally finished Kebab19's fork upgrade with RaceTech emulators from PDQ1.com. First ride showed them to be a bit soft; need preload adjusters now!
And this is the last of a long list of jobs since buying the Fazer earlier this year ('99, 16,000 miles on clock but been garaged and unused for a few years) which started with full brake system rebuild (front and rear), full engine service, rear suspension linkage service, new tyres, new brake lines, and more little jobs than I can remember, or want to think about now.
Took my stainless downpipes off and polished it all by hand. Happy days wish they'd use a better grade stainless. I'd pay a bit more if it meant not having to do this job again.
Did an oil change, trying out this new Westway Fully Synthetic oil i found on Ebay at a reasonable price, and replaced my mangled sump nut for a new magnetic one.
Full clean up and regrease of all 3 calipers.
Used washing powder to clean my K&N air filter, hung it out to dry then re-oiled it.
Lubed clutch cable, gear lever, chain and brake lever.
Then gave the whole bike a good scrub and clean up.
More people are born because of alcohol than will ever die from it.
nearly finished. Think it's a motad system. I used to make stainless exhausts years back and where possible, stuck the seam of the tube inside the bends where it was least likely to be seen. Still, things are usually made to a price these days.
(19-06-16, 05:42 PM)Carter link Wrote: Thanks , I tried to put a pic up using the way but it didn't work, will put just the link up later and see how it goes.
(19-06-16, 05:09 PM)Carter link Wrote: I'm not sure how to post pics on here sorry.
when replying or adding a new post, below the box you are typing in is Additional Options
Click on Additional Options
Click Browse and it will open a window to your local drive.
Select the file and click Open
If you want to add more then click More Attachments and repeat.
when finished click Post. It will take a little longer to post as it is uploading the file to the FOC-U-UK server :thumbup
(13-06-16, 08:20 PM)sinto link Wrote: [quote author=unfazed link=topic=17296.msg234159#msg234159 date=1465844536]
Did the Bike Copper make any reference as to how some of the numbers fell off your reg plate :lol
:lol
When did the cops start advertising fast food outlets?
:rollin :rollin :rollin
[/quote]
CHiPs
More people are born because of alcohol than will ever die from it.
nearly finished. Think it's a motad system. I used to make stainless exhausts years back and where possible, stuck the seam of the tube inside the bends where it was least likely to be seen. Still, things are usually made to a price these days.
Nice Work, not sure about the fairing but rest of the bike looks cool. Just think the fairing cheapens the rest of a great looking job.
If I send you my pipes will you polish them? :lol
I think he would have been more bothered by the brand new Harley if he was looking at number plates, but it looked mean with the black and silver![[Image: 420174.png]](http://badges.fuelly.com/images/smallsig-uk/420174.png)
wish they'd use a better grade stainless. I'd pay a bit more if it meant not having to do this job again.
