What have you done to your FZS600 bike today

[celticdog]

Well finally stuck in new front pads after cleaning the pistons as one had became stuck and wore a pad practically down to the metal.
Took her for a spin and hey ho it's still binding . . . Guess i'll be rebuilding a blue spot when I get a chance to get round to it 

[matt7chunk]

Fitted my new renthal 758 bars and progrips,  they feel real good and less stress on the wrist

Sent from my GT-I9300 using Tapatalk

[sgpwwg]

Fitted spare set of Pirelli supercorsas, oil change, stripped and cleaned the carbs, new plugs, caps and coils all ready for Bedford autodrome track day on the old girl.

All ready and set for the day.

Fantastic day had great time with another fazer 600. Did 120 miles on the track, my tyres took a hammering.


A few on track picks of the day, have booked again for 25th July.

New pick it was getting very low on the fast corners.

[sgpwwg]

https://www.youtube.com/watch?v=2eTLf8nu...mZmETuO4sA


Being followed by Matt Dobson on his immaculate FSZ600 at Bedford Autodrome on Saturday 4th June.

[darrsi]

Today:
Exhaust off to change oil filter.
Oil and filter change
Clutch plates replaced
Clutch adjustment
Replaced left-hand switchgear
Checked tyre pressures.
Adjusted chain
Tightened left footpeg that had come lose.

Exhaust off to change oil filter???
Feck that, no need whatsoever?  :eek

[darrsi]

I have an aftermarket exhaust. It is impossible for me to get a filter in/out without removing the headers! 

Photo's please, i'm very confused?

[grizzler]

Tested the fuel pump, pumps like a good un but just won't stop pumping :wall ..lol

[Rumbles]

So the old girl passed with no advisiors on monday and ive had a few bits and bobs needing too go on rim tape , heat wrap , irodium plugs and a pipercross filter ! Looks and rides much better now. Ive still got a alloy radiator too go on but if i find time this weekend it will be fitted

[unfazed]

http://www.youtube.com/watch?v=2eTLf8nus...mZmETuO4sA


Being followed by Matt Dobson on his immaculate FSZ600 at Bedford Autodrome on Saturday 4th June.

Just like mine, does 120mph in 4th  :lol :lol

[crickleymal]

So the old girl passed with no advisiors on monday and ive had a few bits and bobs needing too go on rim tape , heat wrap , irodium plugs and a pipercross filter ! Looks and rides much better now. Ive still got a alloy radiator too go on but if i find time this weekend it will be fitted

You seem to have forgotten the fairing.  :lol

[Rumbles]

Yea you could say haha i couldnt stand it with the fairing on , personally the bike feels alot better without it .. except over 80 mph ?

[darrsi]

Had a short power cut and a 3 hour complete internet outage last night, so decided to change the oil on the bike.


Rounded off the marshmallow sump bolt.  :'(


I never ever do it up tight either, but trying to undo it with only a ring spanner in a stupid spot that a socket won't fit, plus me being right handed not helping, it all went a bit Pete Tong.


Bike's just coming up to the 4000 mile point since the last oil change so no big deal, and new shiny magnetic bolt on order.

[crickleymal]

Yea you could say haha i couldnt stand it with the fairing on , personally the bike feels alot better without it .. except over 80 mph ?

Surely you'd never break the speed limit  :rollin

[sinto607276]

Finally got my H4 HID  working so now have some decent lights upfront, won't really get benefit till later in the year but maybe some later night runs soon to try them and my new rear shock and front spring set up.

[Rumbles]

[quote author=Rumbles link=topic=17296.msg233918#msg233918 date=1465514085]
Yea you could say haha i couldnt stand it with the fairing on , personally the bike feels alot better without it .. except over 80 mph ?

Surely you'd never break the speed limit  :rollin
[/quote]

Oh no , ofcourse not mate haha

[Adam2201]

Finally got my H4 HID  working so now have some decent lights upfront, won't really get benefit till later in the year but maybe some later night runs soon to try them and my new rear shock and front spring set up.

Sweet Jesus that's bright!  Are you running 2 H4 HIDs or is it a custom set up?  Mine has the cyclops look.

[Adam2201]

Put the old girl through her MOT.  Passed with no advisories despite an additional once over from the bike copper parked next to her 


Now it's lighter in the evenings, the list of summer jobs begins.  Brake rebuild, carb clean, headers need re-painting... 

[sinto607276]

[quote author=sinto link=topic=17296.msg233954#msg233954 date=1465578803]
Finally got my H4 HID  working so now have some decent lights upfront, won't really get benefit till later in the year but maybe some later night runs soon to try them and my new rear shock and front spring set up.

Sweet Jesus that's bright!  Are you running 2 H4 HIDs or is it a custom set up?  Mine has the cyclops look.
[/quote]
Thanks Adam
Yeah they're bright and not blinding, had my mate well in front of me and he told me and no oncoming vehicles flashed at me so they must be ok.
I really want to take them out for a midnight blast to try them but I'm generally sleeping so I'll need to wait for the darker nights

Both standard bulbs H1 & H4 but in 6000k HID kit and dual light mod as well.

[unfazed]

Put the old girl through her MOT.  Passed with no advisories despite an additional once over from the bike copper parked next to her 


Now it's lighter in the evenings, the list of summer jobs begins.  Brake rebuild, carb clean, headers need re-painting...

Did the Bike Copper make any reference as to  how some of the numbers fell off your reg plate  :lol

[sinto607276]

Did the Bike Copper make any reference as to  how some of the numbers fell off your reg plate  :lol

:lol

When did the cops start advertising fast food outlets?
:rollin :rollin :rollin