R6 Shocks for the FZS Fazer 600 1998-2003

[kebab19]

Unlucky.  For new Yamaha parts I would normally mail order from Fowlers in Bristol.

However, if they are extortionately priced (and they probably will be) you might consider getting another 2nd hand shock linkage off ebay.

Actually, I think I might have a spare linkage in the garage.  If you want I can check it over?

[kebab19]

I have managed to get two more suitable R6 shocks, tho supplies appear to be drying up 


My machinist has now fabricated 7mm thick dogbones for anyone who may be concerned about the width of the original bones.
Anyone who wants a set, send me back your originals and I will forward you a revised set of 'bones 1st class Recorded

[pilgo]

I have managed to get two more suitable R6 shocks, tho supplies appear to be drying up 


My machinist has now fabricated 7mm thick dogbones for anyone who may be concerned about the width of the original bones.
Anyone who wants a set, send me back your originals and I will forward you a revised set of 'bones 1st class Recorded

you have pm mate  :thumbup

[kebab19]

Five more of these shocks in, four used with low mileages and one of them is unused - straight off a bike that was immediately destined for racing.

Used shocks £200 + £13 ParcelForce P&P
Unused shock £225 + £13 ParcelForce P&P

All parts needed for conversion to the FZS600 will be included, and all shocks will be re-sprung to your specific requirements, meaning it's a straight swap for your now utterly knackered rear shock  :lol 

[bozboz]

Pm sent re:unused shock

[kebab19]

Have got some more of these shocks in for conversion.
A bit cheaper this time too:

Used shock will be £175 + £13 Parcelforce P&P
Unused Shocks are £200 + £13 Parcelforce P&P

P.S. Anyone weighing around 14-16 stone looking one of these shocks should PM 'Yamazer-92', as he's selling his at a reduced price.

[singhangad]

Any chance you could sell me only the TOP hat spacer?

[kebab19]

Sorry, sold all the conversion  parts I had nearly two years ago and my machinist who made the parts has retired / disappeared  :\ Should be someone here who knows someone who can help out...