Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Picked up another bike
#1
Buts It's not another fazer. Even though I was looking at some.

It's a 1990 cbr1000 f. Needs a bloody lot of work, but it was £150!

Means I'll be able to keep up with you lot on the ride outs!
Reply
#2
Pictures?  I can imagine it looks a bit rough for £150 but still... Big Grin
Reply
#3
A bit rough is an understatement, but it wont take much money to get it looking good again, just time Smile

[Image: photo_2.th.jpg]
[Image: photo_3.th.jpg]
[Image: photo_4.th.jpg]
[Image: photo_5.th.jpg]
[Image: 1.th.jpg]
[Image: 2.th.jpg]
[Image: 3.th.jpg]
[Image: 4.th.jpg]
[Image: 5.th.jpg]
Reply
#4
That doesn't look to bad for the money!  What's it like mechanically?
Reply
#5
Yeah mechanically its ok, did the 100 mile journey back without issues. Just needs service items, tyres, brake seals etc. Then I will get it tested and taxed and work on the cosmetics!
Reply
#6
Good bike, Cam tensioners can make em rattle but a guy on cbrforum.com made a manual one for his, Some times adjusting the balance shaft can make them smoother and quieter.
[Image: moded_10.jpg][Image: fazer110.png]
Reply
#7
(07-01-14, 01:12 PM)karlo link Wrote: Good bike, Cam tensioners can make em rattle but a guy on cbrforum.com made a manual one for his, Some times adjusting the balance shaft can make them smoother and quieter.


Thats what I read too, mine seems to be ok, its rattly for 30 seconds then quiets down. Must have been done as its done 86,000 miles.
Reply
#8
I put Buell pegs on the one I had and Genmar risers.





Attached Files Thumbnail(s)
   
[Image: moded_10.jpg][Image: fazer110.png]
Reply
#9
Lots of potential there, man! Have a ball...  Big Grin
The Deef's apprentice
Reply
#10
(07-01-14, 01:24 PM)karlo link Wrote: I put Buell pegs on the one I had and Genmar risers.

I like the look of that!
Reply
#11
(07-01-14, 11:11 PM)ChristoT link Wrote: Lots of potential there, man! Have a ball...  Big Grin

Heh I always do! A whole new set of problems to fix, happy days.
Reply
#12
I had one back in 91 excellent bit of kit but typical Honda does everything very well especially long distance, just lacked character.
Later
Reply
#13
I'm looking at a VFR 1200...
Reply
#14
(08-01-14, 04:38 PM)JZS 600 link Wrote: I'm looking at a VFR 1200...


Hmm I was looking at them as well, but out of my very small price range lol
Reply
#15
Nice project there  Wink and it's cheap enough that you can spend a few quid on it and still get your money back if you want to sell it
Reply
#16
(08-01-14, 05:51 PM)His Dudeness link Wrote: Nice project there  Wink and it's cheap enough that you can spend a few quid on it and still get your money back if you want to sell it


Thanks! Thats was the thought about it, I have about 100 pounds worth of fuel in collecting it, just put a a new tyre on it. Going to do the brake seals tomorrow and take it for an MOT friday hopefully.
Reply
#17
Rip all that tupperware off & streetfighter it.
Anatidaephobia: The fear that somewhere, somehow, a duck is watching you.
Reply
#18
(08-01-14, 06:30 PM)The Rocketeer link Wrote: Rip all that tupperware off & streetfighter it.

Possibly, the bodywork is half the charm though
Reply
#19
[Image: vehicle_96978385_421846.jpg]
Reply
#20
(08-01-14, 08:59 PM)JZS 600 link Wrote: [Image: vehicle_96978385_421846.jpg]

Hmm that is shiny
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)