Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
LED indicator boards
#1
Hi all


As mentioned before, I have gotten round to finishing my custom LED Indicator boards, a video and some pics over on my blog:


http://fotifixes.com/2013/02/02/led-indi...ds-fzs600/


Any feedback welcome!
Reply
#2
Well if anyone say's they did not know you were going to turn, you can present them with a white stick.
Reply
#3
Damn right Smile they weren't too hard to do either
Reply
#4
Hi if you take a look at the post front fork respray and scroll down you will see wear I put my led indicators on my old black fzs600
Reply
#5
Ah yes I think I can see, do you have any more pics? Did you use led strips?
Reply
#6
If you got some small male and female bullet connectors you could remove the old sockets, thread the leads though the stalk and have a neat job without wires bodged onto old bulb bases. Wink
Reply
#7
True, but then I would have had to wait until I got the bullet connectors, and patience isnt in my virtue!
Reply
#8
yes I did front and back.


Attached Files Thumbnail(s)
       
Reply
#9
Ah looks good.where they drilled through the fairing or stuck on top. Looks good
Reply
#10
Through the fairing so they sat flush front ones a little harder to do as they are on acurve a little more space between each hole as the the gap on the strip becomes bigger as you bend it.
Reply
#11
Nice idea like that a lot. Will keep it in mind for my next project
Reply
#12
I put LED indicator strips on the front of my bike yesterday, i'm very impressed with the results!
More people are born because of alcohol than will ever die from it.
Reply
#13
Awesome, any pics?
Reply
#14
Let me work the new phone out and i'll sort a video out!
More people are born because of alcohol than will ever die from it.
Reply
#15
Look forward to it Smile
Reply
#16
Don't know if this video is gonna work?
If it does, sorry about the sniff, i have a cold, and the beeping is for the benefit of every arsehole who insists on stepping out in front of me as i turn into my road! A blast of the air-horn normally follows  :lol 




Can you let me know if the video is viewable please?  :thumbup





Attached Files
.mp4   video-2013-02-03-16-52-35.mp4 (Size: 12.5 MB / Downloads: 14)
More people are born because of alcohol than will ever die from it.
Reply
#17
(05-02-13, 01:47 PM)darrsi link Wrote: Don't know if this video is gonna work?
If it does, sorry about the sniff, i have a cold, and the beeping is for the benefit of every arsehole who insists on stepping out in front of me as i turn into my road! A blast of the air-horn normally follows  :lol 




Can you let me know if the video is viewable please?  :thumbup

Not here in work. My puter could be Jurrasic and have hassle viewing MP4. Can you save it in a earlier version for dinosaur peeps like me?  I have the  :lurk waitng!!
Reply
#18
(05-02-13, 02:09 PM)packie link Wrote: [quote author=darrsi link=topic=6126.msg55931#msg55931 date=1360068450]
Don't know if this video is gonna work?
If it does, sorry about the sniff, i have a cold, and the beeping is for the benefit of every arsehole who insists on stepping out in front of me as i turn into my road! A blast of the air-horn normally follows  :lol 




Can you let me know if the video is viewable please?  :thumbup

Not here in work. My puter could be Jurrasic and have hassle viewing MP4. Can you save it in a earlier version for dinosaur peeps like me?  I have the  :lurk waitng!!
[/quote]


It's taken me 2 days to get this far, not up to speed with my new phone yet  :groan
More people are born because of alcohol than will ever die from it.
Reply
#19
Works for me Smile

Looking good as well, like it very much.

I put it on youtube for you, bit easier for other people to view Smile

Fazer FZS600 Indicator mod by Darrsi



Reply
#20
Ok, i've just been told it is a viewable video, so Packie you're gonna have to tell your bosses to upgrade your Commodore PC  :lol


These are the lights i bought  http://www.ebay.co.uk/itm/Amber-LED-Stic...2a2284e2bc


Had to undo the indicator to slip the wire inside the fairing, then the stripped back wire was put through inside of the bullet connector of the original indicator cable, folded back a bit then pushed back in. Be careful stripping the wire back as the cable is very thin.
The positive/negative wires do have to be the right way round too, otherwise they don't work, as i found out!


I positioned the LED strip just before the curve at the front of the fairing to keep it from being bent at all, as i figured when/if the weather gets hot the heat may melt the double-sided tape and undo it.


*** The advert says you will need resistors to keep the lights in sync with the original indicators, you do NOT need them, they sync just fine ***




I put them on just as an extra warning for when you poke the front of the bike out from a side turning, and to be honest i never thought they'd be that bright but it appears to be a small amount of money well spent  Big Grin
More people are born because of alcohol than will ever die from it.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)