|
stuttering fzs 600
|
22-05-12, 08:33 PM
(22-05-12, 08:30 PM)red98 link Wrote: [quote author=ade the blade link=topic=2066.msg25081#msg25081 date=1337714884] made any progress ade  [/quote] ah....just saw your "angle" post..........we understand you ade..........we dont like it but we understand you 
One, is never going to be enough.....
22-05-12, 08:36 PM
now then ade? ...lets be sensible tonight??....had a bad dream last night?...woke up to find a fazer front wheel between me cheeks :eek .....
22-05-12, 08:40 PM
(22-05-12, 08:30 PM)red98 link Wrote: [quote author=ade the blade link=topic=2066.msg25081#msg25081 date=1337714884] made any progress ade [/quote] ummmmmmmmmmm.....pressure treated half of our decking today, other half tomorrow.....burnt me bloody neck in the sun too.what a twonk. managed to get 2 loads of washing done and dried. had a chat with the fella over the road who`s well into his bsa`s. wolfed down 3 cheeseburgers for tea. gave my opinion on 3 bikinis my missus has bought and modelled ( quite pervy really, right up clive`s street ) thats about it. oh you mean the fazer.................................ummmmmmmmmmmmmmmmmmmmmmmmmmmm no ! :lol
22-05-12, 08:53 PM
ok lads....sensible head for a minute. Red, with regards weak diaphrams a little test i did at one point with the carbs off ( i`m sorry) was to get a shortish length of pipe and tape it into the little snorkel thingy on top of the carbs in the middle with some duck / duck tape and gently blow. what i did observe was 3 of the sliders lifted at identical rates suggesting all was fine with those but carb #1 didn`t shift !!!!!!. turned out main needle somehow was jamming / catching down in the emulsion tube. so a quick clean and lube with graphite powder all all was fine. obviously didn`t help me any long term, but maybe something for you to keep in mind for future reference
22-05-12, 08:54 PM
what you trying to say ade????????????????????? :rolleyes ............got any picy,s for me then?.....and dont go givin that red any? cus between you and me??......think he may be a bit of a perve???????? :evil
22-05-12, 08:59 PM
(22-05-12, 08:54 PM)CRH link Wrote: what you trying to say ade????????????????????? :rolleyes ............got any picy,s for me then?.....and dont go givin that red any? cus between you and me??......think he may be a bit of a perve???????? :evilsorry mate no pics.......for my eyes only ( wasnt that a bond film ) no....old Reds a good lad really, just wants his bike to run right thats all like me,,,,,,,,not a lot to ask really is it ?
22-05-12, 09:06 PM
cant believe you both got same prob????.....still think its diaphrams tho?? if just one of them sliders dont open fully ? you not going to get full performance????
22-05-12, 09:40 PM
(22-05-12, 08:53 PM)ade the blade link Wrote: ok lads....sensible head for a minute. Red, with regards weak diaphrams a little test i did at one point with the carbs off ( i`m sorry) was to get a shortish length of pipe and tape it into the little snorkel thingy on top of the carbs in the middle with some duck / duck tape and gently blow. what i did observe was 3 of the sliders lifted at identical rates suggesting all was fine with those but carb #1 didn`t shift !!!!!!. turned out main needle somehow was jamming / catching down in the emulsion tube. so a quick clean and lube with graphite powder all all was fine. obviously didn`t help me any long term, but maybe something for you to keep in mind for future reference top tip ade...thanks for that...next time i remove the carbs i`ll try that
One, is never going to be enough.....
22-05-12, 09:42 PM
(22-05-12, 08:54 PM)CRH link Wrote: what you trying to say ade????????????????????? :rolleyes ............got any picy,s for me then?.....and dont go givin that red any? cus between you and me??......think he may be a bit of a perve???????? :evil i aint no perve.......can we see the pictures,i`ll give you one of my special sweets
One, is never going to be enough.....
22-05-12, 09:43 PM
(22-05-12, 09:06 PM)CRH link Wrote: cant believe you both got same prob????.....still think its diaphrams tho?? if just one of them sliders dont open fully ? you not going to get full performance???? not 100% sure its the same problem but might be related 
One, is never going to be enough.....
22-05-12, 09:52 PM
yes! know what ades ref, to?....and if you do try that? remember to check the slider locating groove? making sure thats clean etc? get a pencil.....GRAFFITE...and rub up and down the slit?>>>>>dont fkn start???? :rolleyes to make sure it can slide freely?
22-05-12, 09:58 PM
thank you clive...........forgot to mention that red, did exactly that but with the powder. use something like a cocktail ( :rolleyes ) stick to clean the slit, obviously being ali, they will get badly gouged using anything metally....is there such a word?
22-05-12, 10:00 PM
guys if ya near a goggle box right now check out channel 4...............sick bastards ! :lol
22-05-12, 10:06 PM
no ade?? u thinking of ...mentaly :eek ........ps corr i cud? if you and red held its legs open??????? :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b :b got horn on now!!!!!!!
22-05-12, 10:10 PM
you twisted whizzbanger !! :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin :rollin
23-05-12, 08:57 PM
ok....more sensable stuff.....took the bike to work today..after replacing the diaphrams last night......made no difference :\ ......got in tonight and fitted the downpipes i bought off DEADEYE,I`ve welded the old ones a few times now over the years and was thinking that some of the weld might be causing a restriction,i`ve also replaced the can with one thats been in the garage for years,when i took the old one off there was quite a lot of what i guess to be loose/broken baffles shook the can and got most of them out but had the spare so on it went...will use for work again tommrow.............hows the decking going ade ?
One, is never going to be enough.....
|
|
« Next Oldest | Next Newest »
|
. oh good morning red !!