tyre pressure

[brianwtom]

Hi everybody,hope you all had a good weekend,please could anyone give me the correct tyre pressure for my 1999 fazer 600 ive seen so many different ones dont know which aree correct thank you all brian.

[Bracechenko]

32 psi front and 36 rear.....you can't go wrong if you keep them in that range. If you're a particularly heavy guy or always ride 2 up you might want 34 & 38 but otherwise stick to what i've said 

[Fazer Jake]

think it depnds on u weight/personal preference, run 36 front 42 rear

[ddtwelve]

yep mine says after 90kilos of weight 36 front 42 rear  :lol

[Bracechenko]

yep mine says after 90kilos of weight 36 front 42 rear  :lol

That's too high and not correct. The manual says 32 & 36 and i've ridden over 60k miles on FZS600's and can say that those pressures work the best.

I weigh 80kgs and any higher pressures make the bike too skittish and don't allow the tyres to warm up. The best thing to do is try these pressures and see how you get on mate, there is an element of personal preference too.

My FZ1 is meant to be 36 & 42 but that's too high for that bike and makes it hard to get the tyres to temp when i'm caning it. I prefer 34 & 38 on that bike but it's down to you to decide.

[bootz76]

go online the correct ones are the the tyre manufacturer reccommeneds  ie wot tyres u got u check with them NOT bloody yamaha or haynes

[fazersharp]

36,40,90,10 no matter what your gauge says -no point unless you have a correct reading and reliable one. NOT garage forecourt

[JZS 600]

Mine runs fine on 36/42, not noticed any wobbling

[Skippernick]

I run 36, 39. Just to throw a different combo in :rollin

[YamFazMan]

Hi
Here's where 36/42 came from
http://www.motorcycle-tourer.com/touring...sures.html
ATB YFM

[glynblue2]

Totally agree 36/42 is the best combination without a doubt,amazes me how the bloke down the pub who probably has never even had anything to do with bikes in any way shape or form but owns one knows more about bikes tyres etc than the manufacturers,how come if they are that knowledgeable they arent working for a manufacturer??

[Skippernick]

Hi
Here's where 36/42 came from
http://www.motorcycle-tourer.com/touring...sures.html
ATB YFM

Linky doesn't work

[JZS 600]

What a great article! Sold!

[brianwtom]

thank you all for replys brian.

[Oxygen]

Bridgestone say 36 - 36 for BT023

manual says 32 - 40  for over 90 kg which is me. although for me this does feel a little bit wobbly between 60-80.

http://www.bridgestonebikersclub.co.uk/f...ing=step-2

It Would be handy to get a definitive but it looks like there is not one

[Fazerider]

Agree with Bracechenko. You can do a lot better by experimenting than accepting the "universal" figures of 36/42.
That article from the Avon man sounds like tosh to me... 36/42 regardless of tyre manufacturer/bike/loading? :rolleyes


FWIW I am on the light side, no pillion and Bridgestone BT021s and find 33/37 to be the optimum pressures.

[fazersharp]

Everyone stop --- I have sorted it I have taken all the above and worked out the average for the back is 39.8 exactly, lets do that

[Motorbreath]

The article is unbeliveable: same pressure for everything?? :eek that pressure in a hot trackday is crazy.
the first time I went to a track I thought that the lower pressure was unnecesary because my road tyres and lack of skills. No way, the bike started to drift a lot, I was very worried and a guy insisted to change the pressure a lot. It solved the problem totally.

[Farjo]

Everyone stop --- I have sorted it I have taken all the above and worked out the average for the back is 39.8 exactly, lets do that

:rollin

[Jacko]

Avon say 33, 36 for storm 2's  and its much better
I nearly binned them after a week at 36 , 42.