8 hours ago
(This post was last modified: 7 hours ago by fazersharp.)
I was being very careful but just over estimated how much I could pump them out to clean and one popped out, not a lot of fluid came out and I managed to get it back in ok.
And do a good job of cleaning.
The reservoir did not empty so no air got in from the top. Calapers and pads back in and re attached to forks, I have pumped the leaver and but obviously its going to need bleeding.
But will I have to do both sides I am thinking that the other side will be ok.
If it matters its braided lines two piece via a double banjo at the reservoir
I am dreading undoing the bleed nipple for fear of it snapping, I have some penetrating liquid sitting on the thread.
And do a good job of cleaning.
The reservoir did not empty so no air got in from the top. Calapers and pads back in and re attached to forks, I have pumped the leaver and but obviously its going to need bleeding.
But will I have to do both sides I am thinking that the other side will be ok.
If it matters its braided lines two piece via a double banjo at the reservoir
I am dreading undoing the bleed nipple for fear of it snapping, I have some penetrating liquid sitting on the thread.
I don't do rain or threat there of. dry rider only with no shame.