09-01-26, 10:11 PM
(09-01-26, 09:26 PM)unfazed Wrote: Bike model and year would be a great help. Check the routing of the fuel pipe, common problem on the 600 is the fuel pipe is people routing the pipe to the tank over the cross rail of the frame kinking the pipe when the tank is down. The pipe should be routed under the cross rail. On the 1000 and 600 a blocked breather in the tank could cause it, try running it with the fuel cap open. Othere issue maybe the fuel tap not fully turned on. On the 600 there is a small inline fuel filter which could be dirty enough to slow the filling og the carbson the plastic T-piece where the fuel pipe connect to the carbs.
It’s a 2000 fzs600. I’m pretty sure routing is all ok I followed what I could see in Haynes manual but I’ll try to get some photos soon definitely routed under cross railing tho. Breather and overflow are both clear. I replaced the filter around 2 and a bit months ago and ,having the system disconnected after the filter, fuel seems to flow to that point fine and the pump seems to be priming and clicking normally when the bikes running so I assumed it’s an issue coming from after the pump.