I was thinking the same as B1k3rdude mount the caliper at the top. I was looking at my own bike and there should be enough space to mount it there. You could use the FZS600 rear brake line as it would have a bend to suit as the entry hole for the brake fluid which would be at the rear. You would really need to mount the wheel on with it to be absolutely sure.
It would probably look better as the bottom would not be cluttered with the brace, the torque arm and the caliper. You would need to check clearance from the caliper to the exhaust
It would probably look better as the bottom would not be cluttered with the brace, the torque arm and the caliper. You would need to check clearance from the caliper to the exhaust