Hi borderline13, welcome to the forum. If you feel you need to get more weight over the front one option would be to drop the forks through the yokes and maybe alter the dog bones to give a 25mm lift, which would still allow the rear wheel to be off the ground when on the centrestand. Changing from stock to Renthal 758 handlebars would also help as they have a lower lift than stock. One other option would be to change the handlebar clamp for a GYTR one, which mounts the bars closer to the top yoke than stock. You wouldn’t be able to drop the forks through much if fitting the GYTR mount as it is that close to the top yoke. If you feel it’s under geared, then checking both sprockets to see if they are stock or not would answer that question. Never had a problem with the stock set up, although when I first got my Fazer, coming from a Fireblade, I did find myself searching for 7th until I got used to the engine note. An option there would be to fit a Healtech Gipro gear indicator, if it continued to be a problem for you. Hope you get your queries answered, ride safe??
Whizz kid sitting pretty on his two wheeled stallion.