05-08-25, 01:56 PM
(This post was last modified: 05-08-25, 05:07 PM by imaburnthisfazer.)
(05-08-25, 11:32 AM)Gnasher Wrote: There is no means of tensioning the oil/water pump drive chain. Either you've not refitted something correctly e.g. sprocket, chain guide or there's excessive wear in the chain, sprockets or shafts.
Noises are very subjective, given this is your fist time working on this bike and possibly limited bike spannering experience you could end up doing more damage. Firstly why were you taking out the waterpump?
i was under the assumption that the ticking noise i was hearing was from there so i was gonna look into if it needed any repair or anything and then found that the weep hole was leasking oil so i ended up deciding to just regasket italso to add i only loosened the sprocket and pump i never removed either and i also didnt remove the chain at all