19-11-24, 07:52 PM
If you suspect electrical then probably be carbs and vice versa!
Has it been laid up? Could the pilot jets be blocked? Sometimes a run through with some carb cleaner additive can work but only ever had limited success.
Sounds like you might be chasing your tail somewhat. Usual advice will be to cut a few mm of the end of the HT leads to ensure you have a good connection.
Has it been laid up? Could the pilot jets be blocked? Sometimes a run through with some carb cleaner additive can work but only ever had limited success.
Sounds like you might be chasing your tail somewhat. Usual advice will be to cut a few mm of the end of the HT leads to ensure you have a good connection.