Plastic welding

[robbo]

    Few pics of my damaged/Q bonded and finished fairing. The crack in the fairing was held open quite a bit due to the fairing/mirror support frame getting bent. This frame was replaced, and once the fairing was removed I zip tied the cracked area together and left it for several days. When the ties were removed the size of the crack was minimal, and plastic welding reinforced with some aluminium mesh, then coated in Q bond seemed to do the trick. Not much filling was required, and the painter was quite impressed with my effort, much to my surprise as was prepared for him not to want to do it.
The pics should show 1.The damage. 2.The Q bond welded repair. 3.Ready for the painter, and lastly the finished article.