08-08-24, 05:39 PM
Check the HT lead, the plug cap and plug. The coil shouldn't be the problem as each coil fires 2 cylinders, in which case both wouldn't be firing if it was a coil. From memory the HT leads are bonded into the coil pack, the issue with these is at the plug cap end. Unscrew the cap and check the lead. If they need trimming be careful you don't trim too much, as mentioned the coil end is bonded.
To check the cap swap it for one on a cylinder that's firing and the same with the plug, remove it and put it into t a firing plug cap.
To check the cap swap it for one on a cylinder that's firing and the same with the plug, remove it and put it into t a firing plug cap.
Later