03-03-24, 09:41 PM
FINALLY (I think...)
Been out today checking continuity etc on nearly everything I could find.
I'm pretty sure I don't have this Diode thing the manual says should be just under the coils/pump plate (should be right next to the fuel sender connector I believe) cannot find it without taking the whole loom apart!
BUT I digress - I've re-checked the continuity on the ignition switch and one path is faulty while the others where fine.
So, I'm selling the ICU I got from eBay the other week for £30 as that's what I paid for it - never even fit it to the bike - and trying to look for the correct ignition switch.
I keep seeing ones listed as 2002 but the wiring is wrong - there's not enough of them lol.
Thanks for the replies.
Been out today checking continuity etc on nearly everything I could find.
I'm pretty sure I don't have this Diode thing the manual says should be just under the coils/pump plate (should be right next to the fuel sender connector I believe) cannot find it without taking the whole loom apart!
BUT I digress - I've re-checked the continuity on the ignition switch and one path is faulty while the others where fine.
So, I'm selling the ICU I got from eBay the other week for £30 as that's what I paid for it - never even fit it to the bike - and trying to look for the correct ignition switch.
I keep seeing ones listed as 2002 but the wiring is wrong - there's not enough of them lol.
Thanks for the replies.